Monthly Archives: October 2013

Moustachio – the transformation is complete


Once the components were chosen, assembly could take place. Wheels were greased and trued. Duro Sierra tires were selected – puncture resistant, with reflective sidewalls. Derailleurs were installed – the front one original and the rear one new – a Shimano Alivio RD-M410. Cabling was configured for derailleurs and brakes.  Wrap-around fenders and a sturdy rear carrier were included in the mix, adding functionality and style. My Lion Bellworks bell was transferred from the Expediter light duty cargo bike to the new city bike.

Then for a new experience – wrapping the moustache handlebars. Before tackling the job, I went online and discovered that there are as many experts on the topic as there ways to wrap handlebars. By combining the ideas and approaches that seemed to make the most sense to me, the job was completed and the results very satisfying.

Next up – a test ride, followed by a photo shoot. The test ride proved exhilarating – the light frame and narrow tires coupled with the ability to “get down” on the moustache bars produces a fun ride that turns heads when you stop long enough for folks to appreciate it. Great fun.






Categories: Rescued and returned to use | Tags: , , , , , , , , , , , | Leave a comment

Moustachio – the ingredients for a transformation

Well, in the last post, it was clear that some there was still a lot of work to get that old Norco bicycle looking presentable. It required removing ALL of the paint, including the original very nice two tone job, and in addition, all of the decals and stickers. I will spare you the details – suffice it to say that it took time, elbow power and several sheets of sandpaper. Once the bike was “clean to the bone”, it was time for the “paint booth/bike shed” and the metallic Pearl Glow paint that had been selected. Here we are, just hanging around, waiting for paint to dry…


Next? the fun part – after cleaning old components that were to be recycled, it was time to select and find the new ones that would make the transformation. You may recall that I mentioned something in the last post about moustache handlebars… Let me tell you the story of the origin of this style. It goes back to the 70’s in Japan when school children fell in love with the drop down handlebars of racing bikes. For some reason, school authorities felt that these bars were too, well, too riske!! and they banned the use of them by school children. But the kids found a way around that by modifying the original style. Perhaps it is the wanna-be-rebel side of me then that is drawn to this style of handlebar… :o)

So, lets have a look at those “rebels”. Here they are, resting nicely in a stem that I picked up a year ago, originally used on a lowrider bike that had been trashed. Yes, those bars may not look like much yet, but take time to wait for the outcome.


I knew that the Shimano quick shift combination levers that were originally used on the Norco bike could not be used with these handlebars. Bar end shifters are in common use with moustache handlebars and it is easy to see why. However, I did not have these and I did not want to spend the money to buy them but there was an alternative that I was certain would work…


Yes, something ‘old school’ – Shimano shifter levers from a road bike from the 70’s, attached to the stem. There were a collection of these shifter levers in a coffee tin in the “parts” department of my workshop  and by mixing and matching and searching through a pile of old road bikes that were destined for the recycle melting pot, I was able to put together a set that looked good and worked well.

Next – brake levers… My research had disclosed that non-aero brake levers were the best choice when using moustache bars and while going through that pile of old road bikes, I found a possible candidate set. I was not completely satisfied because the hoods on them were long gone. About the time that I found these, serendipity stepped in. An ad appeared on Kijiji for a “mint condition vintage drop bar shimano brake lever set”. The ad described them as coming from “a 1978 Miele road bike, the drop bar is a “Sakae Custom Road Champion”  in near perfect condition minus wear from original install…  The brake lever set is Shimano, both levers come with hoods which are in good shape”. I inquired to see if the levers could be purchased separately but was told that they would only go as a set. An hour later, the vendor messaged me back to tell me that someone wanted to buy the handlebars only, and so I quickly went to pick up the levers and hoods – here they are…


As you know, it takes a bit more than handlebars, shift and brake levers to make a bicycle but in this instance, these were the most interesting components. With these now on hand and with the paint finally cured, check out the next post to see the final outcome of this transformation.

Categories: Rescued and returned to use | Tags: , , , , , , , , , | Leave a comment

Create a free website or blog at